CAT Flooring Ramp Profiles
Carpet Accessory Trims manufacture and supply a comprehensive range of ramps for every flooring situation
including materials such aluminium, brass and stainless steel.
Request a Call Back.
If you would like to talk to us about your requirements, fill in the form below and one of our team will call you back.
CAT Ramp Edge Trims
CAT manufacture ranges of ramp edges sometimes called door bars or ramp thresholds in brass, aluminium and stainless steel. These profiles are designed to accommodate height differences between floor coverings whilst maintaining a safe transition for foot traffic. Ramp Profiles are available in a range of fixing styles including stick-fix, kliks clip in and drilled for mechanical fixing.
If you have any questions regarding our range then please contact our customer service department on 01582 561 500 Sample of all of our flooring ramps are available free of charge, please click the button below to order.
FAQs
What size ramp do I need?
The difference in floor level will dictate what size or height of ramp you will require. Simply measure this difference from the lower floor to the higher floor. If the difference in floor height is 10mm then our AR10 will accommodate this difference. On each of our products CAT have attached a profile illustration with accurate measurements to help guide you when selecting the correct ramp for your situation.
What is the difference between a flooring ramp and a feather edge?
Flooring Ramps and Feather Edge Ramps effectively solve the same problem of one floor being higher than the other and removing any trip hazard. Feather edges generally directly adjoin or butt up to the floor covering and are between 2.5mm and 5mm thick. A flooring ramp or threshold ramp however tends to be fixed over the top of the floor covering and can accommodate small 3mm differences to large 20mm height changes.